GE PDWT580PSS Owners Manual - Page 13

Removing the Upper Rack, Silverware, Basket - canada

Page 13 highlights

Shower Nozzle Service Part Number WD12XlO134 tab out Remove end cap ge.com Removing the Upper Rack Your new dishwasher has the capability to wash extra large items in the lower rack, This is accomplished by removing the upper rack and installing a nozzle over the port that normally supplies water to the upper rack, The nozzle is not included with your dishwasher, but isavailable for purchase from GE.Call GEat 1.800.626.2002or go to the GE website ge.com and request NozzleSpray Asm, part number WD12X10134. Customers in Canada can order on-line at geappliances.ca 24 hours every day, or by phone at 1.800.661.1616during normal business hours. NOTE:Do not use the TOPRACKONLYcycle (some models)with this feature. Single Rack Wash cycle is for upper rack wash only. The recommended cycle for lower rack only use is the COOl(WAREcycle. NOTE:Nozzlemust be in place with upper rack removed. If not installed properly, poor wash performance and noise will result. To remove the upper rack: ITI Pressthumb tab out and remove the front end caps on each side of the rail. r_ Pullthe rack straight out and offthe rails. [] Replacethe end caps. 14-I Pushthe rails all the way back into the dishwasher. FI Slidethe shower nozzle attachment over the spout. "Shower nozzle attachment r_ Then fill the lower rack and begin your cycle. NOTE:Don't forget to remove the shower nozzle attachment before you replace the upper rack. Silverware Basket One-piece basket (on some modelsl Three-piece basket (on some modelsl Don't let any item extend through bottom. To load flatware, simply push the adjustable handle to either side (on some models).Put flatware in the removable basket with fork and knife handles up to protect your hands. Placespoons in the basket with handles down. Mix knives,forks and spoons so they don't nest together. Distribute evenly. Small plastic items, such as measuring spoons and lids from small containers should go in the bottom of the silverware basket with the silverware on top. The one-piece silverware basket (on some models) can be placed in the front, right side or back of the lower rack. A variety of options isavailable regarding the three-piece silverware basket (on some models) in your dishwasher. The complete basket is designed to fit on the right side of the lower rack. Additionally, each end of the basket is removable to add loading flexibility to accommodate flatware and lower rack capacity needs. The lids of both end and middle baskets (on some models)can be closed to contain small items. Long items can be placed on the utility shelf in the upper rack. To remove end baskets, grasp the basket at opposite corners and slide apart. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

Shower Nozzle Service
Part Number
WD12XlO134
tab out
Remove end cap
ge.com
Removing the Upper Rack
Your new dishwasher has the capability to
wash extra large items in the lower rack, This
is accomplished by removing the upper rack
and installing a nozzle over the port that
normally supplies water to the upper rack,
The nozzle is not included with your
dishwasher, but isavailable for purchase from
GE.CallGEat 1.800.626.2002or go to the GE
website ge.com and request NozzleSpray
Asm, part number WD12X10134.
Customers
in
Canada can order on-line at
geappliances.ca 24 hours every day, or by
phone at 1.800.661.1616during normal
business hours.
NOTE:Do not use the
TOPRACKONLY
cycle
(some models)with this feature. Single Rack
Wash cycle is for upper rack wash only.
The recommended cycle for lower rack
only use is the COOl(WAREcycle.
NOTE:Nozzlemust be in place with upper
rack removed. If not installed properly, poor
wash performance and noise will result.
To remove the upper rack:
ITI
Pressthumb tab out and remove the
front end caps on each side of the rail.
r_
Pullthe rack straight out and offthe rails.
[]
Replacethe end caps.
14-I Pushthe rails all the way back into the
dishwasher.
FI
Slidethe shower nozzle attachment over
the spout.
"Shower nozzle
attachment
r_
Then fill the lower rack and begin
your cycle.
NOTE:Don't forget to remove the shower
nozzle attachment before you replace the
upper rack.
One-piece
basket
(on
some
modelsl
Three-piece
basket
(on
some
modelsl
Don't let any
item
extend
through
bottom.
Silverware
Basket
To load flatware, simply push the adjustable
handle to either side (on some models).Put
flatware in the removable basket with fork
and knife handles up to protect your hands.
Placespoons in the basket with handles
down. Mix knives,forks and spoons so they
don't nest together. Distribute evenly. Small
plastic items, such as measuring spoons and
lids from small containers should go in the
bottom of the silverware basket with the
silverware on top.
The one-piece silverware basket (on some
models) can be placed in the front, right side
or back of the lower rack.
A variety of options isavailable regarding
the three-piece silverware basket (on some
models) in your dishwasher. The complete
basket is designed to fit on the right side of
the lower rack. Additionally, each end of
the basket is removable to add loading
flexibility to accommodate flatware and
lower rack capacity needs.
The lids of both end and middle baskets (on
some models)can be closed to contain small
items. Long items can be placed on the utility
shelf in the upper rack.
To remove
end
baskets,
grasp
the
basket
at
opposite
corners
and
slide
apart.
13