GE PI6000 Installation Instructions - Page 4

Specifications Voltage Current Maximum loop rating Alarm output Alarm duration Cover tamper contacts Rating Operating temperature Humidity Pulse count RFI immunity Static Immunity Lightning immunity Detection range: PI6000 Pet Immune 6000 High Density Mounting Dimensions: Width Depth Height Color 10 to 16VDC 14mA Typical 20mA max. 16 VDC, 50mA Fail safe contacts-closed loop Normally Closed (N.C.) 5 seconds ( ± 0.5 sec.) Closed loop 16V, 50mA 14°F to 122°F (-10°C to 50°C) 5 to 95% non-condensing Two-pulse or three-pulse Greater than 10V/meter from 10 to 1000MHz 20 kV 2.4 kV, 1.2 joules max. energy impulse, 100 usec duration on field wiring 40' (12.2m) x 90° 35' (10.1m) x 90° Flat wall or corner 3.05" (7.75cm) 1.90" (4.83cm) 2.68" (6.81cm) White The unit should be connected to a UL Listed power supply or control unit capable of providing a minimum of 4 hours standby power. The equipment should be installed in accordance with NFPA 70. The unit should be tested at least once a year. 2.68" 6.81cm Front View Side View 3.05" 7.75cm Figure 7. Dimensions 1.90" 4.83cm Product Ordering Model PI6000 6000 Description 40' x 40' PIR with 30 lb Pet Immune Lens, closed loop, with tamper 35' x 35' PIR with High Density Lens, closed loop, with tamper Listing C-UL US C-UL US g GE Security 12345 SW Leveton Drive Tualatin, OR 97062 Phone: 503-692-4052 USA & Canada: 800-547-2556 Technical Service: 800-648-7424 FaxBack: 800-483-2495 wm 15480D / October, 2004 Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]