GE PP989DNBB Quick Specs - Page 1
GE PP989DNBB - Profile 30" Smoothtop Electric Downdraft Cooktop Manual
UPC - 084691172567
View all GE PP989DNBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PP989DN GE Profile™ 30" Downdraft Electric Cooktop Dimensions and Installation Information KW Rating 240V 9.1 Wall Installation: Wall installations require 25" countertop depth. When cabinet is flush against the wall, the 208V 6.9 fan housing can be rotated to the horizontal position for direct venting through rear wall. Make a countertop cutout in the range cabinet according to unit dimensions and installation type. Duct hole is positioned in back of cabinet for through-the- wall ducting. Requires special offset adapter JXRW89. Peninsula or Island Installation: For peninsula/islands a minimum 26" countertop depth is suggested. Blower should be in vertical position. Island or peninsula cabinets may require adjustment in cutout depth and/or location within the width dimensions. Duct hole is positioned in bottom of cabinet for island or peninsula installation. Slab Installation: For peninsula or island installation and rear wall ducting, 6" PVC duct or locally approved piping should be used if installing under a poured concrete slab. Receptacle Location: Install an approved junction box within shaded area shown in diagram. Junction box must be at least 10-1/2" below top of cabinet. Installation Information: Before installing, consult installation instructions, packed with product, for current dimensional data. Note: Electrical cable is not supplied with unit. These cooktops are approved for indoor use only. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. 227⁄16ʺ (229⁄16ʺ SS) 297⁄8ʺ (30ʺ SS) 22ʺ Cut-out Dimensions (in inches) 201⁄2ʺ 283⁄4ʺ 20-5/8 Cabinet Dimensions (in inches) 25 *U.L. Requirement. 1-7/8" MIN. Required* 28-7/8 16 Note: A 6" minimum spacing to adjacent side wall is required 9 CL 4 20 23⁄16ʺ (21⁄4ʺ SS) 10-1/2 *Note: A 6" minimum spacing to adjacent side wall is required Dimension and installation information are shown in inches. Listed by Underwriters Laboratories Specification Created 7/08 220977