GE PS968SPSS Use and Care Manual - Page 46

Problem, Possible Causes, What To Do, LOCKED/DOOR - problems

Page 46 highlights

Safety Instructions Before You Call For Service... Troubleshooting Tips Operating Instructions Consumer Support Troubleshooting Tips Care and Cleaning Problem Clock and timer do not work Possible Causes What To Do Plug on range is not completely • Make sure electrical plug is plugged into a live, properly inserted in the electrical outlet. grounded outlet. A fuse in your home may be blown or the circuit breaker tripped. • Replace the fuse or reset the circuit breaker. Oven controls improperly set. • See the Using the kitchen timer section. Oven will not self-clean The oven temperature is too high to set a self-clean operation. Oven controls improperly set. The probe is plugged into the outlet in the oven. (on some models) • Allow the range to cool and reset the controls. • See the Using the self-cleaning upper and lower ovens section. • Remove the probe from the oven. "Crackling" or "popping" sound This is the sound of the metal heating and cooling during both the cooking and cleaning functions. • This is normal. Excessive smoking Excessive soil. during a clean cycle • Touch the CLEAR/OFF pad. Open the windows to rid the room of smoke. Wait until LOCKED/DOOR goes off. After the oven cools, wipe up the excess soil and reset the clean cycle. Oven door will not Oven too hot. open after a clean cycle • Allow the oven to cool below locking temperature. Oven not clean after a clean cycle Oven controls not properly set. • See the Using the self-cleaning upper and lower ovens section. Oven was heavily soiled. • Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time. "LOCKED" flashes in the display The self-clean cycle has been • Close the oven door. selected but the door is not closed. "LOCKED" is on when you want to cook The oven door is locked because the temperature inside the oven has not dropped below the locking temperature. • Touch the CLEAR/OFF pad. Allow the oven to cool. "F-" and a number or letter flash in the display You have a function error code. • Disconnect all power to the range for at least 30 seconds and then reconnect power. If the function error code repeats, call for service. 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

Before You Call For Service…
Consumer Support
Troubleshooting Tips
Care and Cleaning
Operating
Instructions
Safety Instructions
Troubleshooting Tips
46
Problem
Possible Causes
What To Do
Clock and timer do
Plug on range is not completely
Make sure electrical plug is plugged into a live, properly
not work
inserted in the electrical outlet.
grounded outlet.
A fuse in your home
Replace the fuse or reset the circuit breaker.
may be blown or the
circuit breaker tripped.
Oven controls improperly set.
See the
Using the kitchen timer
section.
Oven will not self-clean
The oven temperature is
Allow the range to cool and reset the controls.
too high to set a self-clean
operation.
Oven controls improperly set.
See the
Using the self-cleaning upper and lower ovens
section.
The probe is plugged into
Remove the probe from the oven.
the outlet in the oven.
(on some models)
“Crackling” or
This is the sound of the
This is normal.
“popping” sound
metal heating and cooling
during both the cooking and
cleaning functions.
Excessive smoking
Excessive soil.
Touch the
CLEAR/OFF
pad. Open the windows to
during a clean cycle
rid the room of smoke. Wait until
LOCKED/DOOR
goes off. After the oven cools, wipe up the excess soil
and reset the clean cycle.
Oven door will not
Oven too hot.
Allow the oven to cool below locking temperature.
open after a clean cycle
Oven not clean after a
Oven controls not properly set.
See the
Using the self-cleaning upper and lower ovens
clean cycle
section.
Oven was heavily soiled.
Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
“LOCKED” flashes
The self-clean cycle has been
Close the oven door.
in the display
selected but the door is not
closed.
“LOCKED” is on
The oven door is locked
Touch the
CLEAR/OFF
pad. Allow the oven to cool.
when you want
because the temperature
to cook
inside the oven has not
dropped below the
locking temperature.
“F—” and a number
You have a function error code.
Disconnect all power to the range for at least
or letter flash
30 seconds and then reconnect power. If the function
in the display
error code repeats, call for service.