GE PSA1201RSS Use and Care Manual - Page 38

Questions? Use this problem solver Troubleshooting Advantium Oven Problem DISPLAY The display is blank. "Control Panel LOCKED" appears in display. Control display is lighted yet oven will not start. Possible Causes What To Do/Explanation The display has been turned off. The control has been locked. Clock is not set. Door not securely closed. START/PAUSE pad not pressed after entering cooking selection. Delay Start was accidentally set. Oven is in DEMO Mode CLEAR/OFF was pressed accidentally. • Check the SETTINGS menu for clock display settings. Turn the display on. • Press and hold CLEAR/OFF for about 3 seconds to unlock the control. See Other Features Section. • Follow prompts to set the clock. • Open the door and close securely. • Follow prompts • Press CLEAR/OFF and reset. • Unplug the oven for 1 minute, plug the oven back into the wall DO NOT set the oven clock, press and hold the HELP and START/PAUSE pads for 3 seconds. The control should exit DEMO mode. Set clock and continue. • Reset cooking program and press START/PAUSE. OTHER PROBLEMS The door and inside of the oven feels hot. Floor of the oven is warm, even when the oven has not been used. Oven will not start. Glass microwave tray does not lock into center hub. The oven produces intense heat in a small space. The cooktop light is located below the oven floor. When the light is on, the heat it produces may make the oven floor get warm. A fuse in your home may be blown or the circuit breaker tripped. Power surge. Plug not fully inserted into wall outlet. • This is normal. • Use oven mitts to remove food when when ready. • This is normal. • Replace fuse or reset circuit breaker. • Unplug the oven, then plug it back in. • Make sure the plug on the oven is fully inserted into wall outlet. • Align the protrusions on the bottom of the glass microwave tray with the indentation in the turntable. This fit is not tight, some movement is normal. 38