GE PT916SRSS Quick Specs - Page 1

GE PT916SRSS Manual

Page 1 highlights

Cutout width PT9281-16/2S'' MRIN. GE2P8-r5o/8f''iMleA™X. 30" Built-I5n Single Convection Wall Oven Dimensions and Instal2la3t-i1o/n2'I'nMfoIrNm. ation (in inches) KW Rating Cutout depth Junction box 240V 3.8 location 208V 2.8 A Breaker Size B 240V 20 Amps C(o7n22d0"u8iVt 20 Amps 27-1/4'' MIN. 27-5/16'' MAX. 22'' MIN. long) Cutout height Most 30" Wall Cabinets can be used with this unit. Note: These ovens are not approved for stackable installations. Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°FRteemcopmemraetunrdeerdating. cutout location Door handle protrudes 3" fr3o2m-1d/2o"or face. Cabinets 21 and drawers on adjacent 4fr5o°manfldoo9r0° walls should be placed to avoid interference with the handle. Electric wall ovens are not approved for installation with a plug and receptacle. They ce must be h3a0rd wired in accordance with s, or etc. installation instructions. op and botItnosmtaelladtgioens Ionffcourmtoautti.on: Before installing, consult f " owvitehntroimvei­c.nrusrstraiedlnleattediodimngeeinnssstoirofunccatuilotodnaustt.ap.acked with product for Side-by-side installations require at least 2" between cutouts. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. CL 2 x 4 or equivalent runners Suitable bracing to support 21-5/8" over centerline C runners of cabinet (must support 275 lbs.) 29-3/4 Cutout width 28-1/2'' MIN. 28-5/8'' MAX. 5 A Conduit 48-1/2" 23-1/2'' MIN. Cutout depth Junction box location B 27-1/4'' MIN. 27-5/16'' MAX. Cutout height 22'' MIN. Recommended cutout location 32-1/2" 21 from floor Allow minimum of 21'' for clearance 30 to adjacent corners, drawers, walls, or etc. A=Allow 1" overlap of oven over top and bottom edges of cutout. B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout. C=28-1/4" without trim and 28-3/4" with trim. Dimension and installation information are shown in inches. Suitab bracin to suppo runne Listed by Underwriters Laboratories Specification Created 5/10 220247

  • 1
  • 2
  • 3

Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Dimension and installation information are shown in inches.
Specification Created 5/10
220247
PT916SR
GE Profile
30" Built-In Single Convection Wall Oven
KW Rating
240V
3.8
208V
2.8
Breaker Size
240V
20 Amps
208V
20 Amps
Most 30” Wall Cabinets can be used with this unit.
Note:
These ovens are not approved for
stackable installations.
Cabinets installed
adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating.
Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should
be placed to avoid interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions
.
Installation Information:
Before installing, consult
installation instructions packed with product for
current dimensional data.
Side-by-side installations require at least 2"
between cutouts.
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
29-3/4
C
30
Recommended
cutout location
32-1/2"
from floor
21
Junction
box
location
Allow minimum of 21'' for clearance
to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout.
C=28-1/4" without trim and 28-3/4" with trim.
Conduit
48-1/2"
5
27-1/4'' MIN.
27-5/16'' MAX.
Cutout height
A
B
23-1/2'' MIN.
Cutout depth
22'' MIN.
C
L
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
(must support 275 lbs.)
Dimensions and Installation Information (in inches)