GE PT916SRSS Quick Specs - Page 2

PT916SR GE Profile™ 30" Built-In Single Convection Wall Oven Optional Undercounter Dimensions and Installation Information 30" Oven W/ Rad. Cktp. With Electric Cooktop 1-1/2" Typical countertop Note: 36" ribbon cooktops are approved for use over GE 30" single wall ovens only. 30" ribbon cooktops are approved for use over GE 30" and GE 27" single wall ovens. Refer to cooktop and wall oven installation information packed with products for current dimensional data. Note: CleanDesign or Sealed Burner Gas This installation is to achieve minimum gap between bottom of countertop and control panel. For this installation, the bottom trim will not be flush with a typical 4" toe kick Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. With Gas Cooktop 3-1/4 3-1/2" MIN. Free space Conduit 48-1/2" 2 (two) 90°elbows & sufficient pipe to connect in adjacent cabinet Junction box for oven 30" built-in oven 4" To 4-1/2" 1/2" Black iron pipe Pressure regulator Union Shut-off valve 3/4" Support Junction box in adjacent cabinet for cooktop hook-up 22 Power cord for cooktop Right cabinet side Side View 1-1/2" MIN. Free space 30-3/4" to 31-3/4" 27-1/4" MIN. 27-5/16" MAX. Cutout height Power cord Junction box(s) for oven & radiant cooktop 22" from floor 36" Typical Countertop height 22 4-3/4" to 5-1/4" Add suitable filler to match adjacent cabinets when needed to maintain toe kick alignment Side View Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick. Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data. 25 Junction box location 240/208V Gas connection 5 Gas (including the pressure regulator) and electrical connections for gas cooktop must be located in an adjacent accessible location. For a 30" gas cooktop, the connections are more conveniently made to the right. 23-1/2" MIN. Cutout depth 120 Volt Outlet 1-1/2" Countertop Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models. Top and/or side fillers may be necessary if unit is positioned between existing cabinets 28-1/2'' MIN. 28-5/8'' MAX. 27-1/4'' MIN. 27-5/16'' MAX. Cutout height Allow 11/16'' overlap over side edges of cutout 22'' MIN. above support platform 36'' MIN. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. 24 3/4'' Support platform required Match toe kick height front and two sides 4'' To 4-1/2 '' Toe kick allowable Dimension and installation information are shown in inches. Listed by Underwriters Laboratories Specification Created 5/10 220247