GE UCG1680LSS Installation Instructions - Page 7
Installation - trash compactor
![]() |
View all GE UCG1680LSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installation 6 ATTACH THE COMPACTOR TO THE COUNTERTOP 8VHWZR FP ORQJPRXQWLQJ screws to fasten each retaining bracket at the top of the compactor to the underside of the countertop. Retaining bracket Mounting screws • If the brackets cannot be attached to the underside of the countertop, attach mounting clips to the bracket. Fasten the compactor to the cabinet front with mounting screws through the mounting clips. Retaining bracket Mounting screw Mounting clip 7 REINSTALL THE COMPACTOR DRAWER • Grasp the sides of the drawer. Carefully slide the drawer into the compactor. 8 INSTALLATION OF THE TRASH BAG CADDY (on some models) • Set the bag caddy into the drawer and hook the prepunched holes in the caddy on the bag retainer buttons. • Set the trash bag into the bag caddy and fold over. • Hook the holes in the bag over the bag retainer buttons. Trash bag caddy Bag retainer buttons 9 FINALIZE THE INSTALLATION • Turn power on at the source. • Turn the knob to ON. • Make sure the drawer is fully closed. • Lift the foot pedal to start the cycle. • The ram will travel downward, reverse and return to the starting position. • The compactor will shut off automatically. • The cycle should take less than 30 seconds. • Refer to your Owner's Manual for operating instructions. 7
![](/manual_guide/products/general-electric-ucg1680lss-installation-instructions-e5d0ec6/7.png)