GE WNRD2050GWC Use and Care Manual - Page 12
OTHER, Possible Causes, What To Do, Labels on the exterior, of the washer will not, peel off cleanly
View all GE WNRD2050GWC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Safety Instructions Before you call for service... Troubleshooting Tips OTHER Labels on the exterior of the washer will not peel off cleanly Possible Causes Occasionally the adhesive used on the labels does not release cleanly Movement inside machine when shut off Shifting mechanism is disengaging the motor No rinse fill This is normal What To Do • Use a hair dryer set at the lowest heat setting, directing the air at the label for a short amount of time. This will release the adhesive easily, without damaging the surface of the washer. • When the machine is manually turned off, the shifter will disengage the motor before completely shutting down. If the lid is raised before the motor is disengaged, it will resume when lid is closed. • This machine uses three low-water spray rinses to remove soap from clothes and reduce water consumption. Operating Instructions Troubleshooting Tips Consumer Support 12