GE WPGT9360EWW Owners Manual - Page 26
Disconnect Washer, Control Board, Remove Control Board, From Washer Backsplash
UPC - 084691129226
View all GE WPGT9360EWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installation Instructions 3 DISCONNECT WASHER CONTROL BOARD Disconnect the ribbon at the right of the control board by pulling the connector at the end of the ribbon off the metal pins on the control board. NOTE: Do not disconnect any other wires from the control board. 5 REMOVE DRYER BACKSPLASH Place a towel over the top surface of the dryer to prevent scratches to the surface. Remove the four screws from the rear of the dryer backsplash. Rotate backsplash forward and lift off. Screws Rear of Washer 4 REMOVE CONTROL BOARD FROM WASHER BACKSPLASH Remove the four screws holding the control board to the backsplash. Remove the control board and set it aside. Screws Rear of Dryer 6 DISCONNECT DRYER CONTROL BOARD Disconnect the ribbon at the right of the control board by pulling the connector at the end of the ribbon off the metal pins on the control board. NOTE: Do not disconnect any other wires from the control board. Rear of Dryer 26