GE zgu384nsmss Owners Manual - Page 13

Care and Cleaning Gas Cooktop Dual-flame spill-proof burners (cont.) To remove the burner parts: NOTE: Before removing the burner parts, remember their size and location. Replace them in the same location after cleaning for proper burner operation. 1. Turn all controls OFF before removing any burner parts. 2. When cool, you may lift off the burner grates, burner caps and burner heads for easier cleaning. Do not remove the burner bases. 1. Replace the burner head on top of the burner base, making sure that the hole in the burner head is properly aligned with the electrode in the burner base. A small gap between the base and head is normal. Burner cap Burner head To replace the burner parts: Make sure that the burner parts are replaced in the correct location. Medium Burner Medium Burner Electrode Burner base Burner Assembly 2. Place the burner cap on top of the burner head. Make sure that the burner cap is properly seated on the burner head. Large Burner Medium Burner On model ZGU384, there is one large burner head and burner cap and three sets of medium burner heads and burner caps. Medium Burner Large Burner Medium Burner Burner cap properly seated Burner cap not properly seated Burner Cap Alignment Medium Burner Medium Burner On model ZGU385, there is one large burner head and burner cap and four sets of medium burner heads and burner caps. These burner parts are not interchangeable. 13