Gigabyte 7NF-RZC User Manual - Page 24
System Performance, FSB Frequency, Memory Frequency, Resulting Frequency, AGP Frequency
View all Gigabyte 7NF-RZC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
English Advanced Chipset Features CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Advanced Chipset Features System Performance FSB Frequency x Memory Frequency Resulting Frequency AGP Frequency [Normal] [133MHz] By SPD 266MHz [Normal] Item Help Menu Level` [Normal] Use the most stable settings [Turbo] Use over clocked settings for higher performance but with higher risk of instability [Manual] Allows full customization of performance options Advanced users only KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Save Default ESC: Exit F1: General Help F7: Optimized Defaults Incorrect using these features may cause your system broken. For power End-User use only! System Performance Normal Set system at the most stable settings. (Default value) Turbo Use overclock settings for higher performance but with higher risk of instability. Manual Allows full customization of performance options. FSB Frequency 100MHz 133MHz 166MHz 200MHz Set FSB frequency at 100MHz. Set FSB frequency at 133MHz. (Default value) Set FSB frequency at 166MHz. Set FSB frequency at 200MHz. Memory Frequency By SPD Set memory frequency by SPD. (Default value) 50% ~ 200% Set memory frequency manually. Auto Set the best memory frequency for system. Resulting Frequency The value depends on FSB/Memory Frequency settings. AGP Frequency Normal Set the best AGP frequency for system. (Default value) 50MHz ~ 100MHz Set AGP frequency manually. Please follow the instructions below to enable the support for DDR 400 memory modules : (You have to set System Performance to Manual). 1) If you use a processor with FSB100MHz (make sure FSB Frequency is set to 100MHz), set Memory Frequency to 200%. 2) If you use a processor with FSB133MHz (make sure FSB Frequency is set to 133MHz), set Memory Frequency to 150%. 3) If you use a processor with FSB166MHz (make sure FSB Frequency is set to 166MHz), set Memory Frequency to 120%. 4) If you use a processor with FSB200MHz (make sure FSB Frequency is set to 200MHz), set Memory Frequency to 100%. 7NF-RZ Series Motherboard - 24 -