Gigabyte 7VT600-RZ User Manual - Page 12
Step 5: Install I/O Peripherals Cables, Step 4: Install Expansion Cards
View all Gigabyte 7VT600-RZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
English Step 4: Install Expansion Cards 1. Read the related expansion card's instruction document before install the expansion card into the com puter. 2. Please m ake sure your AGP card is AGP 4X/8X (1.5V). AGP 4X /8X notch 3. Please carefully pull out the small white- drawable bar at the end of the AGP slot when you try to install/ Uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly down on the slot .M ake sure your AGP card is locked by the sm all white- drawable bar. AGP Card Step 5: Install I/O Peripherals Cables Step 5-1: I/O Back Panel Introduction v y u y { w xz | } u v w/x y z PS/2 Keyboard and PS/2 Mouse connector This connector supports standard PS/2 keyboard and PS/2 mouse. Parallel port (LPT) Device like printer can be connected to Parallel port. Serial ports (COMA / COMB) Mouse and modem etc. can be connected to Serial port. LAN port * LAN is fast Ethernet with 10/100Mbps speed. USB port Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard, mouse, scanner, zip, speaker...etc. Have a standard USB interface. Also make sure your OS supports USB controller. If your OS does not support USB controller, please contact OS vendor for possible patch or driver upgrade. For more information please contact your OS or device(s) vendors. " * " Support 7VT600-RZ only. 7VT600-RZ Series Motherboard - 12 -