Gigabyte 7VT600P-RZC User Manual - Page 27

English USB 2.0 Controller Disable this option if you are not using the onboard USB 2.0 feature. Enabled Enabled USB 2.0 Controller. (Default value) Disabled Disabled USB 2.0 Controller. USB Keyboard Support When a USB keyboard is installed, please set at Enabled. Enabled Enabled USB Keyboard Support. 8Disabled Disabled USB Keyboard Support. (Default value) USB Mouse Support Enabled Enabled USB Mouse Support. Disabled Disabled USB Mouse Support. (Default value) VIA LAN Boot ROM * This function decide whether to invoke the boot ROM of the onboard LAN chip. Disabled Disable this function. (Default Value) Enabled Enable this function. Onboard Serial Port 1 Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8,Using IRQ4. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8,Using IRQ3. 3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8,Using IRQ4. 2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8,Using IRQ3. Disabled Disable onboard Serial port 1. Onboard Serial Port 2 Auto BIOS will automatically setup the port 2 address. 3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8,Using IRQ4. 2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8,Using IRQ3. (Default Value) 3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8,Using IRQ4. 2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8,Using IRQ3. Disabled Disable onboard Serial port 2. OnBoard Parallel port This feature allows you to select from a given set of parameters if the parallel port uses the onboard I/O controller. 378/IRQ7 Enable onboard LPT port and address is 378, Using IRQ7.(Default Value) 278/IRQ5 Enable onboard LPT port and address is 278,Using IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC,Using IRQ7. Disabled Disable onboard parallel port. Parallel Port Mode This feature allows you to connect with an advanced print via the port mode it supports. SPP Using Parallel port as Standard Parallel Port using IRQ7. (Default Value) EPP Using Parallel port as Enhanced Parallel Port IRQ5. ECP Using Parallel port as Extended Capabilities Port using IRQ7. ECP+EPP Using Parallel port as ECP & EPP mode. " * " Only for 7VT600P-RZ. - 27 - BIOS Setup