Gigabyte 7VT600P-RZC User Manual - Page 29
USB Device Wakeup From S3When ACPI Suspend Type is set [S3STR]
View all Gigabyte 7VT600P-RZC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
English ACPI Suspend Type S1(POS) Set suspend type to Power On Suspend under ACPI OS(Power On Suspend). (Default value) S3(STR) Set suspend type to Suspend To RAM under ACPI OS (Suspend To RAM). USB Device Wakeup From S3(When ACPI Suspend Type is set [S3(STR)]) USB device wakeup From S3 can be set when ACPI standby state set to S3/STR. Enabled USB Device can wakeup system from S3. Disabled USB Device can 'twakeup system from S3. (Default value) Power LED in S1 state Blinking In standby mode(S1), power LED will blink. (Default value) Dual/Off In standby mode(S1): a. If use single color LED, power LED will turn off. b. If use dual color LED, power LED will turn to another color. Soft-off by PWRBTN Instant-off Press power button then Power off instantly. (Default value) Delay 4 Sec. Press power button 4 sec to Power off. Enter suspend if button is pressed less than 4 sec. AC Back Function Memory Soft-Off Full-On System power on depends on the status before AC lost. Always in Off state when AC back. (Default value) Always power on the system when AC back. Keyboard Power On This feature allows you to set the method for powering-on the system. The option "Password" allows you to set up to 8 alphanumeric characters to power-on the system. The option "Keyboard 98" allows you to use the standard keyboard 98 to power on the system. Password Enter from 1 to 8 characters to set the Keyboard Power On Password. Disabled Disabled this function. (Default value) Keyboard 98 If your keyboard have "POWER Key" button, you can press the key to power on your system. Mouse Power On Disabled Enabled Can't Power on system by Mouse Event. (Default value) Can Power on system by Mouse Event. PME Event Wake up When set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled state. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Disabled Disabled PME Event Wake up function. Enabled Enabled PME Event Wake up function. (Default Value) - 29 - BIOS Setup