Gigabyte 7VT880-RZ User Manual - Page 17
F_PANEL 2x10 pins connector, SATA0/SATA1 Serial ATA Connector, Controlled by, VT8237R
View all Gigabyte 7VT880-RZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English 7) SATA0/SATA1 (Serial ATA Connector, Controlled by VT8237R) Serial ATA can provide up to 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA and install the proper driver in order to work properly. 7 1 S_ATA (Controlled by VT8237R) Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND For more detailed Serial ATA RAID setup information, please visit our website at http:\\www.gigabyte.com.tw. 8) F_PANEL (2x10 pins connector) Please connect the power LED, PC peaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment above. Message LED/Power/ Sleep LED MSGMSG+ 2 1 IDE Hard Disk HHDD+- Active LED Soft Power Connector Speaker Connector PW- PW+ SPEAK+ SPEAK- 20 19 NC RES- RES+ Reset Switch HD (IDE Hard Disk Active LED) SPEAK (Speaker Connector) RES (Reset Switch) PW (Soft Power Connector) MSG (Message LED/Power/ Sleep LED) NC Pin 1: LED anode(+) Pin 2: LED cathode(-) Pin 1: VCC(+) Pin 2- Pin 3: NC Pin 4: Data(-) Open: Normal Operation Close: Reset Hardware System Open: Normal Operation Close: Power On/Off Pin 1: LED anode(+) Pin 2: LED cathode(-) NC - 17 - Hardware Installation Process