Gigabyte 7VT880-RZ User Manual - Page 25

English Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) Fri, Jan 9 2004 22:31:24 Item Help Menu Level ` ` IDE Channel 0 Master ` IDE Channel 0 Slave ` IDE Channel 1 Master ` IDE Channel 1 Slave ` IDE Channel 2 Master ` IDE Channel 3 Master Drive A Drive B Floppy 3 Mode Support Halt On [None] [None] [None] [None] [None] [None] [1.44M, 3.5"] [None] [Disabled] [All, But Keyboard] Change the day, month, year Sun. to Sat. Jan. to Dec. 1 to 31 (or maximum allowed in the month) Base Memory Extended Memory Total Memory KLJI: Move Enter: Select F5: Previous Values 640K 127M 128M +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults 1999 to 2098 ESC: Exit F1: General Help F7: Optimized Defaults Date The date format is , , , . Week From Sun. to Sat., determined by the BIOS and for display only. Month From Jan. to Dec. Day From 1st to 31st (or the maximum allowed in the month). Year From Year 1999 to 2098. Time The format used to express time is hours:minutes:seconds. The time is calculated based on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. IDE Channel0/Channel 1 Master(Slave) setup You can use one of the three methods below: Auto Allows BIOS to automatically detect IDE devices during POST. (Default value) None Select this if no IDE devices are used and the system will skip the automatic detection step and allow for faster system start up. Manual User can manually input the correct settings Access Mode Use this to set the access mode for the hard drive. The four options are: CHS/LBA/Large/Auto (Default:Auto) IDE Channel 2 Master/ IDE Channel 3 Master IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. Extended IDE Drive setup You can use one of the two methods below: Auto Allows BIOS to automatically detect IDE devices during POST. (Default value) None Select this if no IDE devices are used and the system will skip the automatic detection step and allow for faster system start up. Access Mode Use this to set the access mode for the hard drive. The two options are: Large/Auto (Default:Auto) Capacity Capacity of currently installed hard disk. - 25 - BIOS Setup