Gigabyte GA-780T-D3L Manual - Page 32
CPU FrequencyMHz, PCIE ClockMHz, HT Link Frequency, Set Memory Clock, DCTs Mode, DDR3 Timing Items
View all Gigabyte GA-780T-D3L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
&& CPU Frequency(MHz) Allows you to manually set the CPU host frequency. The adjustable range is from 200 MHz to 500 MHz. This option is configurable only when CPU Host Clock Control is set to Manual. Important It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. && PCIE Clock(MHz) Allows you to manually set the PCIe clock frequency. The adjustable range is from 100 MHz to 150 MHz. Auto sets the PCIe clock frequency to standard 100 MHz. (Default: Auto) && HT Link Frequency Allows you to manually set the frequency for the HT Link between the CPU and chipset. Auto BIOS will automatically adjust the HT Link Frequency. (Default) x1~x10 Sets HT Link Frequency to x1~x10 (200 MHz~2.0 GHz). && Set Memory Clock Determines whether to manually set the memory clock. Auto lets BIOS automatically set the memory clock as required. Manual allows the memory clock control item below to be configurable. (Default: Auto) && Memory Clock This option is configurable only when Set Memory Clock is set to Manual. The adjustable range is dependent on the CPU being installed. `` DRAM Configuration CMOS Setup Utility-Copyright (C) 1984-2011 Award Software DRAM Configuration DCTs Mode DDR3 Timing Items x 1T/2T Command Timing x CAS# latency x RAS to CAS R/W Delay x Row Precharge Time x Minimum RAS Active Time x TwTr Command Delay x Trfc0 for DIMM1, DIMM3 x Trfc1 for DIMM2, DIMM4 x Write Recovery Time x Precharge Time x Row Cycle Time x RAS to RAS Delay [Unganged] [Auto] SPD Auto -- Auto 9T Auto 9T Auto 9T Auto 24T Auto 5T Auto 90ns Auto -- Auto 10T Auto 5T Auto 33T Auto 4T Auto -6T 6T 6T 15T 4T 90ns -6T 4T 20T 4T Item Help Menu Level Channel Interleaving Bank Interleaving [Enabled] [Enabled] Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults && DCTs Mode Allows you to set memory control mode. Ganged Sets memory control mode to single dual-channel. Unganged Sets memory control mode to two single-channel. (Default) && DDR3 Timing Items Manual allows all DDR3 Timing items below to be configurable. Options are: Auto (default), Manual. BIOS Setup - 32 -