Gigabyte GA-78LMT-S2PT Manual - Page 26
Standard CMOS Features, IDE Channel 0, 1 Master/Slave
View all Gigabyte GA-78LMT-S2PT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
&& CPU Voltage Control Allows you to set the CPU voltage. Auto sets the CPU voltage as required. The adjustable range is dependent on the CPU being installed. (Default: Auto) Note: Increasing CPU voltage may result in damage to your CPU or reduce the useful life of the CPU. && Normal CPU Vcore Displays the normal operating voltage of your CPU. 2-4 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) Wed, Nov 9 2011 22:31:24 Item Help Menu Level `` IDE Channel 0 Master `` IDE Channel 0 Slave `` IDE Channel 1 Master `` IDE Channel 1 Slave `` IDE Channel 2 Master `` IDE Channel 2 Slave `` IDE Channel 3 Master `` IDE Channel 3 Slave [None] [None] [None] [None] [None] [None] [None] [None] Halt On [All, But Keyboard] Base Memory Extended Memory 640K 766M Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults && Date (mm:dd:yy) Sets the system date. && Time (hh:mm:ss) Sets the system time. && IDE Channel 0, 1 Master/Slave IDE Channel 0, 1 Master/Slave Configure your SATA devices by using one of the three methods below: •• None If no IDE/SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. •• Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default) •• Manual Allows you to manually enter the specifications of the hard drive when the hard drive access mode is set to CHS. Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large. && IDE Channel 2/3 Master/Slave Extended IDE Drive Configure your SATA devices by using one of the two methods below: •• Auto Lets the BIOS automatically detect IDE/SATA devices during the POST. (Default) •• None If no IDE/SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. Access Mode Sets the hard drive access mode. Options are: Auto (default), Large. Capacity Approximate capacity of the currently installed hard drive. - 26 -