Gigabyte GA-78LMT-S2PT Manual - Page 28

AMD K8 Cool&Quiet control, EFI CD/DVD Boot Option - driver

Get Gigabyte GA-78LMT-S2PT PDF manuals and user guides View all Gigabyte GA-78LMT-S2PT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

&& IGX Configuration The settings in this submenu are synchronous to those under the same items on the MB Intelligent Tweaker(M.I.T.) main menu. && AMD C1E Support Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the power consumption will be reduced during system halt state. Auto If a CPU that supports hardware C1E is installed, the BIOS will automatically enable the hardware C1E function. If not, the C1E function will be disabled. (Default) Enabled If a CPU that supports hardware C1E is installed, the BIOS will automatically enable the hardware C1E function. If not, the BIOS will enable the software C1E function. Disabled Disables the C1E function. && Virtualization Virtualization allows a platform to run multiple operating systems and applications in independent partitions. With virtualization, one computer system can function as multiple virtual systems. (Default: Disabled) && AMD K8 Cool&Quiet control Auto Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to reduce heat output from your computer and its power consumption. (Default) Disabled Disables this function. && AMD APM Master Mode Auto Lets BIOS automatically configure this setting. (Default) Enabled Dynamically monitors the power consumption of the CPU cores and automatically optimizes the CPU to its best performance level. Disabled Disables this function. && CPU Unlock (Note) Allows you to determine whether unlock hidden CPU cores. (Default: Disabled) && CPU core Control (Note) Allows you to determine whether to manually enable/disable CPU Core 1/2/3/4/5. Auto Lets the BIOS to enable all CPU cores (number of cores available depends on the CPU being used). Manual Allows you to individually enable/disable CPU Core 1/2/3/4/5. && CPU core 0 (Note) This setting is fixed. CPU Core 0 is always enabled. && CPU core 1, 2/3/4/5 (Note) Enables or disables CPU Core 1/2/3/4/5. (Default: Enabled) && Hard Disk Boot Priority Specifies the sequence of loading the operating system from the installed hard drives. Use the up or down arrow key to select a hard drive, then press the plus key (or ) or the minus key (or ) to move it up or down on the list. Press to exit this menu when finished. && EFI CD/DVD Boot Option Set this item to EFI if you want to install the operating system to a hard drive larger than 2.2 TB. Make sure the operating system to be installed supports booting from a GPT partition, such as Windows 7 64-bit and Windows Server 2003 64-bit. Auto lets the BIOS automatically configure this setting depending on the hard drive you install. (Default: Auto) (Note) This item is present only when you install a CPU that supports this feature. - 28 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
- 28 -
IGX Configuration
&
The settings in this submenu are synchronous to those under the same items on the
MB Intelligent
Tweaker(M.I.T.)
main menu.
AMD C1E Support
&
Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the power
consumption will be reduced during system halt state.
Auto
If a CPU that supports hardware C1E is installed, the BIOS will automatically enable the
±
hardware C1E function. If not, the C1E function will be disabled. (Default)
Enabled
If a CPU that supports hardware C1E is installed, the BIOS will automatically enable the
±
hardware C1E function. If not, the BIOS will enable the software C1E function.
Disabled
Disables the C1E function.
±
Virtualization
&
Virtualization allows a platform to run multiple operating systems and applications in independent partitions.
With virtualization, one computer system can function as multiple virtual systems.
(Default: Disabled)
AMD K8 Cool&Quiet control
&
Auto
±
Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to reduce
heat output from your computer and its power consumption. (Default)
Disabled
Disables this function.
±
AMD APM Master Mode
&
Auto
±
Lets BIOS automatically configure this setting. (Default)
Enabled
Dynamically monitors the power consumption of the CPU cores and automatically
±
optimizes the CPU to its best performance level.
Disabled
Disables this function.
±
CPU Unlock
&
(Note)
Allows you to determine whether unlock hidden CPU cores. (Default: Disabled)
CPU core Control
&
(Note)
Allows you to determine whether to manually enable/disable CPU Core 1/2/3/4/5.
Auto
Lets the BIOS to enable all CPU cores (number of cores available depends on the CPU
±
being used).
Manual
Allows you to individually enable/disable CPU Core 1/2/3/4/5.
±
CPU core 0
&
(Note)
This setting is fixed. CPU Core 0 is always enabled.
CPU core 1, 2/3/4/5
&
(Note)
Enables or disables CPU Core 1/2/3/4/5. (Default: Enabled)
Hard Disk Boot Priority
&
Specifies the sequence of loading the operating system from the installed hard drives.
Use the up or
down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the minus key <->
(or <PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when finished.
EFI CD/DVD Boot Option
&
Set this item to
EFI
if you want to install the operating system to a hard drive larger than 2.2 TB. Make sure
the operating system to be installed supports booting from a GPT partition, such as Windows 7 64-bit and
Windows Server 2003 64-bit.
Auto
lets the BIOS automatically configure this setting depending on the
hard drive you install. (Default: Auto)
(Note)
This item is present only when you install a CPU that supports this feature.