Gigabyte GA-790FXTA-UD5 Manual - Page 50

2-6 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2009 Award Software Integrated Peripherals OnChip IDE Channel OnChip SATA Type x OnChip SATA Port4/5 Type Onboard ESATA controller Onboard ESATA Mode Onboard SATA3 controller Onboard SATA3 Mode GSATA RAID Configuration } Onboard LAN device Onboard Audio Function Onboard 1394 Function Onboard USB 3.0 Controller OnChip USB Controller USB EHCI Controller USB Keyboard Support USB Mouse Support Legacy USB storage detect Onboard Serial Port 1 Onboard Parallel Port [Enabled] [Native IDE] IDE [Enabled] [AHCI] [Enabled] [IDE] [Press Enter] [Press Enter] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Disabled] [Enabled] [3F8/IRQ4] [378/IRQ7] MMoovvee EEnntteerr:: SSeelleecctt FF55:: PPrreevviioouuss VVaalluueess ++//--//PPUU//PPDD:: VVaalluuee FF1100:: SSaavvee FF66:: FFaaiill--SSaaffee DDeeffaauullttss Item Help Menu Level  EESSCC:: EExxiitt FF11:: GGeenneerraall HHeellpp FF77:: OOppttiimmiizzeedd DDeeffaauullttss CMOS Setup Utility-Copyright (C) 1984-2009 Award Software Integrated Peripherals Parallel Port Mode x ECP Mode Use DMA [SPP] 3 Item Help Menu Level  Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults OnChip IDE Channel Enables or disables the integrated IDE controller. (Default: Enabled) OnChip SATA Type (AMD SB750, SATA2_0~SATA2_3 connectors) Configures the operating mode of the integrated SATA2_0~SATA2_3 controller. Native IDE Allows the SATA controller to operate in Native IDE mode. (Default) Enable Native IDE mode if you wish to install operating systems that support Native mode. RAID Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. BIOS Setup - 50 -