Gigabyte GA-790XT-USB3 Manual - Page 40
CPU Host Clock Control, CPU Frequency MHz, Set Memory Clock, DCTs Mode, DDR3 Timing Items, MB
UPC - 818313009791
View all Gigabyte GA-790XT-USB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
DRAM Configuration CMOS Setup Utility-Copyright (C) 1984-2009 Award Software DRAM Configuration CPU Host Clock Control x CPU Frequency(MHz) Set Memory Clock x Memory Clock DCTs Mode DDR3 Timing Items x CAS# latency x RAS to CAS R/W Delay x Row Precharge Time x Minimum RAS Active Time x 1T/2T Command Timing x TwTr Command Delay x Trfc0 for DIMM1 x Trfc2 for DIMM2 x Trfc1 for DIMM3 x Trfc3 for DIMM4 x Write Recovery Time x Precharge Time x Row Cycle Time [Auto] 200 [Auto] x6.66 [Unganged] [Auto] Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto Auto 1333Mhz SPD 9T 9T 9T 24T -5T 110ns ---10T 5T 33T Auto 9T 9T 9T 24T -5T 110ns ---10T 5T 33T Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2009 Award Software DRAM Configuration x RAS to RAS Delay **DCTs Drive Strength** ProcOdt(ohms) DQS drive Strength Data drive Strength MEMCLK drive Strength Addr/Cmd drive Strength CS/ODT drive Strength CKE drive Strength Auto 4T 4T DCT0 DCT1 [Auto] 60 [Auto] 240 [Auto] 1.0x [Auto] 1.5x [Auto] 1.0x [Auto] 1.5x [Auto] 1.25x [Auto] 1.5x [Auto] 1.5x [Auto] 2.0x [Auto] 1.5x [Auto] 2.0x [Auto] 1.5x [Auto] 2.0x Item Help Menu Level Bank Interleaving Channel interleave [Enabled] [Enabled] Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults CPU Host Clock Control, CPU Frequency (MHz), Set Memory Clock, Memory Clock The settings under the four items above are synchronous to those under the same items on the MB Intelligent Tweaker(M.I.T.) main menu. DCTs Mode Allows you to set memory control mode. Ganged Sets memory control mode to single dual-channel. Unganged Sets memory control mode to two single-channel. (Default) DDR3 Timing Items Manual allows all DDR3 Timing items below to be configurable. Options are: Auto (default), Manual. BIOS Setup - 40 -