Gigabyte GA-790XT-USB3 Manual - Page 90
For the JMicron JMB362, RAID/AHCI Driver for GIGABYTE GBB36X Controller, On the next screen
UPC - 818313009791
View all Gigabyte GA-790XT-USB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
For the JMicron JMB362: Insert the floppy disk containing the SATA RAID/AHCI driver and press . Then a controller menu similar to Figure 3 below will appear. Select RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32) and press . Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32) ENTER=Select F3=Exit Figure 3 Step 3: On the next screen, press to continue the driver installation. After the driver installation, you can proceed with the Windows XP installation. Appendix - 90 -
Appendix
- 90 -
For the JMicron JMB362:
Insert the floppy disk containing the SATA RAID/AHCI driver and press <S>. Then a controller menu similar
to Figure 3 below will appear. Select
RAID/AHCI Driver for GIGABYTE GBB36X Controller
(x32)
and press
<Enter>.
Step 3:
On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can pro-
ceed with the Windows XP installation.
Figure 3
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ENTER=Select
F3=Exit
RAID/AHCI Driver for GIGABYTE GBB36X Controller (x32)