Gigabyte GA-7PESH1 Manual - Page 17

Speed LED Link Activity LED 10/100 LAN Port MLAN Speed LED: Link/Activity LED: State Green On Green Blink Off Description 100 Mbps data rate 10 Mbps or 100 Mbps data rate 10 Mbps data rate State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring Speed LED Link Activity LED 10/100/1000 LAN Port I350 Speed LED: Link/Activity LED: State Yellow On Yellow Blink Description 1 Gbps data rate Identify 1 Gbps data rate State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Green On Green Blink 100 Mbps data rate Off Identify 100 Mbps data No data transmission or receiving is occurring rate Off 10 Mbps data rate Speed LED Link Activity LED 10/100/1000/10G LAN Port X540 Speed LED: State Description Green On Green Blink 10 Gbps data rate Identify 10 Gbps data rate Yellow On Yellow Blink 1 Gbps data rate Identify 1 Gbps data rate Off 10 Mbps or 100 Mbps data rate Link/Activity LED: State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring • When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. • When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. - 17 - Hardware Installation