Gigabyte GA-7PESH1 Manual - Page 33
SATA_DOM0/1 SATA DOM Jumper, FLASH_DP1 Flash Descriptor Security Jumper
View all Gigabyte GA-7PESH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
7/8) SATA_DOM0/1 (SATA DOM Jumper) CAUTION! If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed and set to 2-3 pins (Normal mode), in order to reduce any risk of hard disk damage. 1 1-2 Close: Enable SATA0/SATA1 port DOM support. 1 2-3 Close: Normal mode. (Default setting) 9) FLASH_DP1 (Flash Descriptor Security Jumper) 1 1-2 Close: Flash Descriptor Security Overridden 1 2-3 Close: Flash Descriptor Security in effect. (Default setting) - 33 - Hardware Installation
- 33 -
Hardware Installation
7/8) SATA_DOM0/1 (SATA DOM Jumper)
9)
FLASH_DP1 (Flash Descriptor Security Jumper)
1-2 Close: Enable SATA0/SATA1 port DOM support.
2-3 Close: Normal mode. (Default setting)
1
1
1
1
2-3 Close: Flash Descriptor Security in effect.
(Default setting)
1-2 Close: Flash Descriptor Security Overridden
CAUTION!
If a SATA type hard drive is connected to the motherboard, please ensure the
jumper is closed and set to
2-3 pins
(Normal mode),
in order to reduce any risk of hard disk
damage.