Gigabyte GA-7PESH3 Manual - Page 11
x SATA 3Gb/s connectors SATA2/SATA3/SATA4/SATA5
View all Gigabyte GA-7PESH3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Storage Interface USB Internal Connectors Rear Panel I/O Intel® C602 controller 2 x SATA 6Gb/s connectors (SATA0/SATA1) 4 x SATA 3Gb/s connectors (SATA2/SATA3/SATA4/SATA5) 8 x SAS 6Gb/s connectors (SAS01/SAS23/SAS45/SAS67) Support for Intel RSTe SATA RAID 0, RAID 1 Up to 6 USB 2.0/1.1 ports (4 on the back panel, 2 additional ports via the USB brackets connected to the internal USB headers) Up to 8 USB 3.0 ports (4 on the back panel, 2 Type A connector 2 additional ports via the USB brackets connected to the internal USB headers) 2 x Type A USB 3.0 connectors 1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V power connector 8 x SAS 6Gb/s connectors 2 x SATA 6Gb/s connectors 4 x SATA 3Gb/s connectors 1 x PMBus header 2 x CPU fan headers 4 x System fan headers 1 x Front panel header 1 x HDD back plane board header 2 x SAS SGPIO headers 1 x USB 2.0/1.1 header 1 x USB 3.0 header 2 x USB 3.0 Type A connectors 1 x TPM module connector 1 x Front audio header 1 x RAID KEY header 1 x S/PDIF Out header 4 x USB 2.0/1.1 ports 3 x RJ-45 port (1 x 10/100 dedicated management LAN port) 1 x COM port 1 x VGA port I/O Controller ASPEED® AST2300 BMC chip Hardware Monitor BIOS Form Factor System voltage detection CPU/System temperature detection CPU/System fan speed detection CPU/System fan speed control * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. 1 x 64 Mbit flash AMI BIOS EATX Form Factor; 12 inch x 13 inch, 10 layers PCB * GIGABYTE reserves the right to make any changes to the product specifications and product-related information without prior notice. - 11 - Hardware Installation