Gigabyte GA-7PESVL Manual - Page 22
CPU Fan/System Fan Headers, PWR_DET1 PMBus connector
View all Gigabyte GA-7PESVL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4) PWR_DET1 (PMBus connector) Pin No. Definition 5 1 SMB CLK 2 SMB DATA 3 SMB Alert 1 4 GND 5 3.3V Sense 5/6/7/8/9/10) CPU0_FAN1/CPU1_FAN1/SYS_FAN1/SYS_FAN2/SYS_FAN3/SYS_FAN4 (CPU Fan/System Fan Headers) The motherboard has two 4-pin CPU fan headers, and four 4-pin system fan headers. Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is the ground wire). The motherboard supports CPU fan speed control, which requires the use of a CPU fan with fan speed control design. For optimum heat dissipation, it is recommended that a system fan be installed inside the chassis. 1 Pin No. 1 2 3 4 Definition GND +12V Sense Speed Control SYS_FAN1 SYS_FAN2 SYS_FAN3 SYS_FAN4 CPU0_FAN1 CPU1_FAN1 • Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheating. Overheating may result in damage to the CPU or the system may hang. • These fan headers are not configuration jumper blocks. Do not place a jumper cap on the headers. - 22 - Hardware Installation