Gigabyte GA-7PTSH Manual - Page 16
prevent an electrical short inside the cable connector.
View all Gigabyte GA-7PTSH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Speed LED Link Activity LED 10/100 LAN Port 10/100 (MLAN) Speed LED: State Green On Green Blink Description 100 Mbps data rate 10 Mbps or 100 Mbps data rate Off 10 Mbps data rate Link/Activity LED: State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring Speed LED Link Activity LED 10/100/1000 LAN Port 10/100/1000 (GbE) Speed LED: State Yellow On Yellow Blink Green On Green Blink Off Description 1 Gbps data rate Identify 1 Gbps data rate 100 Mbps data rate Identify 100 Mbps data rate 10 Mbps data rate Link/Activity LED: State Description On Link between system and network or no access Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring • When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. • When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. Hardware Installation - 16 -