Gigabyte GA-870A-USB3L Manual - Page 24
SATA3_0/1/2/3/4/5 SATA 6Gb/s Connectors, Controlled by AMD SB850 South Bridge
View all Gigabyte GA-870A-USB3L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
DEBUG PORT DEBUG PORT DEBUG PORT DEBUG PORT DEBUG DEBUG 7) SATA3_0/1/2/3/4/5 (SATA 6Gb/s Connectors, ControlledPObRyTAMD SBP8O5R0T South Bridge) The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA 1.5Gb/s standards. Each SATA connector supports a single SATA device. The AMD SB850 south bridge supports RAID 0, RAID 1, RAID 5, RAID 10, and JBOD. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on configuring a RAID array. SATA3_5 1 7 1 7 SATA3_4 SATA3_0 1 SATA3_3 7 1 SATA3_1 7 SATA3_2 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND Please connect the L-shaped end of the SATA cable to your SATA hard drive. • A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives are to be used, the total number of hard drives must be an even number. • A RAID 5 configuration requires at least three hard drives. (The total number of hard drives does not have to be an even number.) • A RAID 10 configuration requires four hard drives. Hardware Installation - 24 -