Gigabyte GA-8AENXP-D Manual - Page 37
PATA IDE Set
View all Gigabyte GA-8AENXP-D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
English Enhanced Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6 HDDs to use. Non-Combined Set On-Chip SATA mode to Non-Combined, SATA will be simulated to PATA mode. PATA IDE Set to Ch.1 Master/Slave Set PATA IDE to Ch. 1 Master/Slave. (Default value) Ch.0 Master/Slave Set PATA IDE to Ch. 0 Master/Slave. SATA Port 0/2 Set to This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to". If PATA IDE were set to Ch. 1 Master/Slave, this function will auto set to Ch. 0 Master/Slave. SATA Port 1/3 Set to This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to". If PATA IDE were set to Ch. 0 Master/Slave, this function will auto set to Ch. 1 Master/Slave. USB Controller Enabled Disabled Enable USB controller. (Default value) Disable USB controller. USB 2.0 Controller Disable this function if you are not using onboard USB 2.0 feature. Enabled Disabled Enable USB 2.0 dontroller. (Default value) Disable USB 2.0 controller. USB Keyboard Support Enabled Disabled Enable USB keyboard support. Disable USB keyboard support. (Default value) USB Mouse Support Enabled Enable USB mouse support. Disabled Disable USB mouse support. (Default value) Azalia Codec Auto Auto detect Azalia audio function. (Default value) Disabled Disable Azalia audio function. Front Panel Type If you connect HD Audio Panel to the AZALIA_FP connector, set this item to HD Audio. If you connect AC97 Audio Panel to the AZALIA_FP connector, set this item to AC97. AC97 HD Audio Set front audio panel type to AC97. Set front audio panel type to HD Audio. (Default value) Onboard H/W 1394 Enabled Disabled Enable onboard IEEE 1394 function. (Default value) Disable this function. Onboard H/W SATA Enabled Enable onboard H/W SATA function. (Default value) Disabled Disable this function. H/W SATA Function RAID Set onboard H/W SATA function as RAID. (Default value) BASE Set onboard H/W SATA function as base. - 37 - BIOS Setup