Gigabyte GA-8I865GMK-775 Manual - Page 37

English SATA Port0 configure as IDE Pri. Master IDE Pri. Slave Set SATA controller to compatible mode. This mode will remap SATA Port 0 to IDE Primary Master. Set SATA controller to compatible mode. This mode will remap SATA Port 0 to IDE Sec. Master IDE Primary Slave. Set SATA controller to compatible mode. This mode will remap SATA Port 0 to IDE Secondary Master. IDE Sec. Slave SATA Port0 Set SATA controller to compatible mode. This mode will remap SATA Port 0 to IDE Secondary Slave. Set SATA controller to native mode(Serial ATA mode - SATA Port 0). This mode SATA Port1 is only supported by Windows XP or later. (Default value) Set SATA controller to native mode(Serial ATA mode - SATA Port 1). This mode is only supported by Windows XP or later. SATA Port1 configure as The setting depends on "SATA Port0 configure as" item setting. (Default: SATA Port1) USB Controller Enabled Disabled Enable USB controller. (Default value) Disable USB controller. USB 2.0 Controller You can disable this function if you are not using onboard USB 2.0 feature. Enabled Disabled Enable USB 2.0 controller. (Default value) Disable USB 2.0 controller. USB Keyboard Support Enabled Disabled Enable USB keyboard support. Disable USB keyboard support. (Default value) USB Mouse Support Enabled Disabled Enable USB mouse support. Disable USB mouse support. (Default value) AC97 Audio Auto Disabled Auto detect AC97 audio function. (Default value) Disable AC97 audio function. Onboard H/W 1394* Enabled Enable onboard IEEE1394 function. (Default value) Disabled Disable this function. Onboard H/W LAN Enabled Enable onboard H/W LAN function. (Default value) Disabled Disable this function. * Only for GA-8I865GMFK-775. - 37 - BIOS Setup