Gigabyte GA-8I915ME-GV Manual - Page 24
IDE IDE Connector, SATA0/SATA2 Serial ATA Connector, Controlled by ICH6 - motherboard driver
View all Gigabyte GA-8I915ME-GV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
English 6) IDE (IDE Connector) An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master and the other as Slave (for information on settings, please refer to the instructions located on the IDE device). 40 39 2 1 7) SATA0/SATA2 (Serial ATA Connector, Controlled by ICH6) Serial ATA can provide up to 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA and install the proper driver in order to work properly. Pin No. Definition 1 GND 1 7 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND GA-8I915ME Series Motherboard - 24 -