Gigabyte GA-8IP775 Manual - Page 37

English On-chip SATA Disabled Disable SATA controller. Auto When there is no device to be plugged in IDE1 or IDE2, SATA controller will remap to IDE controller. (Default value) Manual Set SATA Mode manually. SATA Port0 Configure as IDE Pri. Master Remap SATA Port 0 to IDE Pri. Master. IDE Pri. Slave Remap SATA Port 0 to IDE Pri. Slave. IDE Sec. Master Remap SATA Port 0 to IDE Sec. Master. IDE Sec. Slave Remap SATA Port 0 to IDE Sec. Slave. SATA Port0 SATA controller set to SATA port0. As this mode, it support by WinXP or later OS only. (Default value) SATA Port1 SATA controller set to SATA port1. As this mode, it support by WinXP or later OS only. SATA Port1 Configure as The values depend on SATA Port0. USB Controller Enabled Enable USB Controller. (Default value) Disabled Disable USB Controller. USB 2.0 Controller Disable this function if you are not using onboard USB 2.0 feature. Enabled Enable USB 2.0 Controller. (Default value) Disabled Disable USB 2.0 Controller. USB Keyboard Support Enabled Enable USB Keyboard Support. Disabled Disable USB Keyboard Support. (Default value) USB Mouse Support Enabled Enable USB Mouse Support. Disabled Disable USB Mouse Support. (Default value) AC97 Audio Enabled Enable onboard AC'97 audio function. (Default Value) Disabled Disable this function. Onboard H/W LAN (*) Enabled Enable Onboard H/W LAN function. (Default value) Disabled Disable this function. Onboard LAN Boot ROM (*) This function decide whether to invoke the boot ROM of the onboard LAN chip. Disabled Disable this function. (Default Value) Enabled Enable this function. (*) Only for GA-8IP775-G. - 37 - BIOS Setup