Gigabyte GA-8S661FXM-775 Manual - Page 37
SiS Serial ATA Mode
View all Gigabyte GA-8S661FXM-775 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
English Onboard LAN device Enabled Enable Onboard LAN device function. (Default value) Disabled Disable this function. USB Controller Enabled Disabled Enable USB Controller. (Default value) Disable USB Controller. USB Legacy Support Enabled Disabled Enable USB Legacy Support. Disable USB Legacy Support. (Default value) SiS Serial ATA Controller Enabled Enable SiS Serial ATA Controller.(Default value) Disabled Disable SiS Serial ATA Controller. SiS Serial ATA Mode IDE Set SiS Serial ATA Mode to IDE. RAID Set SiS Serial ATA Mode to RAID (Default value). Onboard Serial Port 1 Auto 3F8/IRQ4 BIOS will automatically setup the Serial port 1 address. Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3. 3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8/IRQ4. 2E8/IRQ3 Disabled Enable onboard Serial port 1 and address is 2E8/IRQ3. Disable onboard Serial port 1. Onboard Serial Port 2 Auto 3F8/IRQ4 BIOS will automatically set up the Serial port 2 address. Enable onboard Serial port 2 and address is 3F8/IRQ4. 2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8/IRQ3. (Default value) 3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8/IRQ4. 2E8/IRQ3 Disabled Enable onboard Serial port 2 and address is 2E8/IRQ3. Disable onboard Serial port 2. Onboard Parallel Port Disabled Disable onboard LPT port. 378/IRQ7 278/IRQ5 Enable onboard LPT port and address is 378/IRQ7. (Default value) Enable onboard LPT port and address is 278/IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7. Parallel Port Mode SPP Use Parallel port as Standard Parallel Port. EPP Use Parallel port as Enhanced Parallel Port. ECP Use Parallel port as Extended Capabilities Port. (Default value) ECP+EPP Use Parallel port as ECP & EPP mode. ECP Mode Use DMA This option is available only when Parallel Port Mode is set to ECP or ECP+EPP. 3 Set ECP Mode Use DMA to 3. (Default value) 1 Set ECP Mode Use DMA to 1. - 37 - BIOS Setup