Gigabyte GA-945GCMX-S2 Manual - Page 37

English HDD S.M.A.R.T. Capability This feature allows your hard disk to report read/write errors and to issue warnings when third- party hardware monitor utility is installed. Enabled Enable HDD S.M.A.R.T. capability. Disabled Disable HDD S.M.A.R.T. capability. (Default value) Limit CPUID Max. to 3 (Note) Enabled Limit CPUID Maximum value to 3 when use older OS like NT4. Disabled Disable CPUID Limit for windows XP. (Default value) No-Execute Memory Protect (Note) Enabled Disabled Enable No-Execute Memory Protect function. (Default value) Disable No-Execute Memory Protect function. Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card, or the onboard VGA. PCI Set Init display first to PCI. (Default value) Onboard PEG PEG2 Set Init Display First to onboard VGA. Set Init display first to PCI Express x16 VGA card. Set Init display first to PCI Express x4 VGA card. On-Chip Frame Buffer Size 1MB Set on-chip frame buffer size to 1 MB. 8MB Set on-chip frame buffer size to 8 MB. (Default value) CPU Hyper-Threading (Note) Enabled Enable CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported. (Default value) Disabled Disable CPU Hyper Threading. CPU Enhanced Halt (C1E) (Note) Enabled Enable CPU Enhanced Halt (C1E) function. (Default value) Disabled Disable CPU Enhanced Halt (C1E) function. CPU Thermal Monitor 2 (TM2) (Note) Enabled Disabled Enable CPU Thermal Monitor 2 (TM2) function. (Default value) Disable CPU Thermal Monitor 2 (TM2) function. CPU EIST Function (Note) Enabled Enable CPU EIST function. (Default value) Disabled Disable EIST function. Virtualization Technology (Note) Enabled Disabled Enable Virtualization technology function. (Default value) Disable this function. (Note) This item will show up when you install a processor which supports this function. Only for GA-945GCMX-S2. - 37 - BIOS Setup