Gigabyte GA-945GZMT-S2-DB Manual - Page 35

English HDD S.M.A.R.T. Capability This feature allows your hard disk to report read/write errors and to issue warnings when thirdparty hardware monitor utility is installed. Enabled Disabled Enable HDD S.M.A.R.T. capability. Disable HDD S.M.A.R.T. capability. (Default value) CPU Hyper-Threading(Note) Enabled Enable CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported. Disabled (Default value) Disable CPU Hyper Threading. Limit CPUID Max. to 3 (Note) Enabled Disabled Limit CPUID Maximum value to 3 when use older OS like NT4. Disables CPUID Limit for windows XP. (Default value) No-Execute Memory Protect (Note) Enabled Disabled Enable No-Execute Memory Protect function. (Default value) Disable No-Execute Memory Protect function. CPU Enhanced Halt (C1E) (Note) Enabled Disabled Enable CPU Enhanced Halt (C1E) function. (Default value) Disable CPU Enhanced Halt (C1E) function. CPU Thermal Monitor 2 (TM2) (Note) Enabled Disabled Enable CPU Thermal Monitor 2 (TM2) function. (Default value) Disable CPU Thermal Monitor 2 (TM2) function. CPU EIST Function (Note) Enabled Disabled Enable CPU EIST function. (Default value) Disable EIST function. Virtualization Technology (Note) Enabled Enable Virtualization technology function. (Default value) Disabled Disable this function. On-Chip VGA This item allows the user to decide when to activate the onboard VGA function. Enable If No Ext PEG Activate the onboard VGA first only when no PCI Express VGA card is installed. (Default value) Always Enable Always activate the onboard VGA first, whether or not a PCI Express card is installed. If you wish to set up a dual view configuration, set this item to Always Enable. On-Chip Frame Buffer Size 1MB Set on-chip frame buffer size to 1 MB. 8MB Set on-chip frame buffer size to 8 MB. (Default value) (Note) This item will show up when you install a processor which supports this function. - 35 - BIOS Setup