Gigabyte GA-945PL-DS3 Manual - Page 32
IDE Channel 0 Master, Slave, IDE Channel 2/3 Master, Slave - s3 manual
View all Gigabyte GA-945PL-DS3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
English 2-1 Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) CMOS Setup Utility-Copyright (C) 1984-2006 Award Software Standard CMOS Features Fri, Jun 23 2006 18:25:04 Item Help Menu Level` ` IDE Channel 0 Master ` IDE Channel 0 Slave ` IDE Channel 2 Master ` IDE Channel 2 Slave ` IDE Channel 3 Master ` IDE Channel 3 Slave [None] [None] [None] [None] [None] [None] Drive A Floppy 3 Mode Support Halt On Base Memory Extended Memory [1.44M, 3.5"] [Disabled] [All, But Keyboard] 640K 511M KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Date The date format is , , , . Week The week, from Sun to Sat, determined by the BIOS and is display-only Month Day The month, Jan. Through Dec. The day, from 1 to 31 (or the maximum allowed in the month) Year The year, from 1999 through 2098 Time The times format in . The time is calculated base on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. IDE Channel 0 Master, Slave IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. IDE Channel 0 Master IDE/SATA Device Setup. You can use one of three methods: Auto Allows BIOS to automatically detect IDE/SATA devices during POST(default) None Select this if no IDE/SATA devices are used and the system will skip the automatic detection step and allow for faster system start up. Manual User can manually input the correct settings Access Mode Use this to set the access mode for the hard drive. The four options are: CHS/LBA/Large/Auto(default:Auto) IDE Channel 2/3 Master, Slave IDE/SATA HDD Auto-Detection Press "Enter" to select this option for automatic device detection. Extended IDE/SATA Drive. You can use one of the two methods: Auto None Allows BIOS to automatically detect IDE/SATA devices during POST(default) Select this if no IDE/SATA devices are used and the system will skip the automatic detection step and allow for faster system start up. GA-945PL-(D)S3 (rev. 2.0) Motherboard - 32 -