Gigabyte GA-945PL-DS3 Manual - Page 45

BIOS Setup

- 45 -

English

Full Thrust

Set C.I.A.2 to Full Thrust. (Automatically increase CPU frequency(17%, 19%)

by CPU loading.

Warning: Stability is highly dependent on system components.

CPU Host Clock Control

Please note that if your system is overclocked and cannot restart, please wait 20secs.

for automatic system restart or clear the CMOS setup data and perform a safe restart.

Disabled

Disable CPU Host Clock Control. (Default value)

Enabled

Enable CPU Host Clock Control.

CPU Host Frequency (Mhz)

100 ~ 600

Set CPU Host Frequency from 100 MHz to 600 MHz.

If you use a 533 MHz FSB processor, set "CPU Host Frequency" to 133 MHz.

If you use a 800 MHz FSB processor, set "CPU Host Frequency" to 200 MHz.

Incorrect using it may cause your system broken. For power End-User use only!

PCI Express Frequency (Mhz)

Auto

Set PCI Express frequency automatically. (Default value)

90~150

Set PCI Express frequency from 90 MHz to 150 MHz.

System Memory Multiplier

The adjustable range will vary based on the CPU FSB. Default value: Auto (set memory

frequency by DRAM SPD data). Wrong frequency settings may cause system unable to boot.

Clear CMOS to overcome wrong frequency issue.

Memory Frequency (Mhz)

The values depend on

CPU Host Frequency (Mhz)

and

System Memory Multiplier

setting.

DIMM OverVoltage Control

Please note that by overclocking your system through the increase of the DIMM voltage, damage

to the memory may occur.

Normal

Set DIMM OverVoltage Control to Normal. (Default value)

+0.1V

Set DIMM OverVoltage Control to +0.1V.

+0.2V


+0.3V


+0.4V


+0.5V


+0.6V


+0.7V



PCI-E OverVoltage Control

Normal

Set PCI-E OverVoltrage Control to Normal. (Default value)

+0.1V

Set PCI-E OverVoltrage Control to +0.1V.

+0.2V


+0.3V



Gigabyte GA-945PL-DS3 Manual - Page 45

PCI Express Frequency Mhz - overclocking

Page 45 highlights