Gigabyte GA-970-Gaming SLI Manual - Page 27
Peripherals, Initial Display Output, Audio LED, OnChip SATA Controller, OnChip SATA Type
View all Gigabyte GA-970-Gaming SLI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
To cancel the password, press on the password item and when requested for the password, enter the correct one first. When prompted for a new password, press without entering any password. Press again when prompted to confirm. NOTE: Before setting the User Password, be sure to set the Administrator Password first. 2-5 Peripherals && Initial Display Output Specifies the first initiation of the monitor display from the installed PCI graphics card or PCI Express graphics card. PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the first display. (Default) PCIe 2 Slot PCI 1 Slot PCI 2 Slot Sets the graphics card on the PCIEX8 slot as the first display. Sets the graphics card on the PCI1 slot as the first display. Sets the graphics card on the PCI2 slot as the first display. && Audio LED Enables or disables the onboard audio LED function. Off Still Mode Beat Mode Disables this function. The LEDs stay constantly on. (Default) The brightness of the LED changes according to the music rhythm. Pulse Mode The brightness of the LED changes slowly and smoothly like breath. && OnChip SATA Controller Enables or disables the integrated SATA controllers. (Default: Enabled) && OnChip SATA Type Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Native IDE Configures the SATA controller to IDE mode. RAID AHCI Enables RAID for the SATA controller. Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) - 27 -