Gigabyte GA-C1007UN User Manual - Page 24
Peripherals, SATA Controllers, SATA Mode Selection, USB2.0 Controller, Audio Controller
![]() |
View all Gigabyte GA-C1007UN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2-5 Peripherals && SATA Controller(s) Enables or disables the integrated SATA controllers. (Default: Enabled) && SATA Mode Selection Allows you to decide whether to configure the SATA controller integrated in the Chipset to AHCI mode. IDE Configures the SATA controller to IDE mode. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && USB2.0 Controller Enables or disables the integrated USB 2.0/1.1 controller. (Default: Enabled) && Audio Controller Enables or disables the onboard audio function. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. && Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card or the onboard graphics. Auto Lets BIOS automatically configure this setting. (Default) IGFX Sets the onboard graphics as the first display. PCI Sets the graphics card on the PCI slot as the first display. && Internal Graphics Enables or disables the onboard graphics function. (Default: Auto) && Internal Graphics Memory Size Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M) && DVMT Total Memory Size Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX. (Default: MAX) - 24 -
![](/manual_guide/products/gigabyte-gac1007un-user-manual-4e0589a/24.png)