Gigabyte GA-E350N Manual - Page 23
UMA Frame Buffer Size, VGA Core Clock control, VGA Core ClockMHz - overclock
View all Gigabyte GA-E350N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2-3 MB Intelligent Tweaker(M.I.T.) CMOS Setup Utility-Copyright (C) 1984-2012 Award Software MB Intelligent Tweaker(M.I.T.) `` IGX Configuration [Press Enter] CPU Frequency(MHz) [Normal] CPU Host Clock Control [Auto] x CPU Host Clock 100 Set Memory Clock [Auto] x Memory Clock x5.33 1066Mhz `` DRAM Configuration [Press Enter] ******** System Voltage Optimized ******** System Voltage Control [Auto] x DIMM OverVoltage Control Auto Normal CPU Vcore 1.3500V Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) && IGX Configuration CMOS Setup Utility-Copyright (C) 1984-2012 Award Software IGX Configuration UMA Frame Buffer Size VGA Core Clock control x VGA Core Clock(MHz) [Auto] [Auto] 492 Item Help Menu Level Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults && UMA Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 256MB, 512MB, 1024MB. && VGA Core Clock control Allows you to determine whether to manually set the VGA Core clock. (Default: Auto) && VGA Core Clock(MHz) Allows you to set the onboard graphics clock. The adjustable range is from 300 MHz to 2000 MHz. This item is configurable only if the VGA Core Clock control option is set to Manual. (Note) This item is present only when you install a CPU that supports this feature. - 23 -