Gigabyte GA-EP45-DS5 Manual - Page 2
TPM Configuration Procedure - driver
View all Gigabyte GA-EP45-DS5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
TPM Configuration Procedure To enable the TPM, follow the steps below in sequence: 1. Configuring the system BIOS 2. Installing the Infineon TPM driver and the GIGABYTE Ultra TPM utility 3. Initializing the TPM chip 4. Configuring the GIGABYTE Ultra TPM utility 1. Configuring the System BIOS To use the TPM functionality, first enter the system BIOS Setup to activate the TPM chip. Step 1: As the computer starts, enter BIOS Setup and go to the Security Chip Configuration menu. The following screen will appear. To activate the TPM chip, set Security Chip to Enabled. It's recommended that you use the Clear Security Chip item to clear the TPM chip as well. Encrypted files will become inaccessible after the TPM chip is cleared. Be sure to back up the encrypted files first. Security Chip Clear Security Chip CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Security Chip Configuration [Enabled] [Enter] Item Help Menu Level` Security Chip State Enabled/Activated KLJI: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Step 2: After finishing the settings, press to save changes and then exit the BIOS Setup program. - 2 -