Gigabyte GA-EP45T-UD3R Manual - Page 98
SATA RAID/AHCI Mode, IntelR ICH8R/ICH9R/ICH10R SATA RAID Controller, IntelR ICH10R, SATA AHCI
View all Gigabyte GA-EP45T-UD3R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Step 3: For Intel ICH10R SATA controllers: When Setup correctly recognizes the Intel ICH10R SA TA RAID/AHCI driver in the floppy disk, a controller menu similar to Figure 3 below will appear. Use the up or down arrow key to select one of the items displayed and press . If you set the SATA RAID/AHCI Mode item in BIOS Setup to RAID mode, select Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller. (Select Intel(R) ICH10R SATA AHCI Controller for AHCI mode.) Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. Intel(R) ESB2 SATA AHCI Controller Intel(R) ICH7R/DH SATA AHCI Controller Intel(R) ICH7M/MDH SATA AHCI Controller Intel(R) ICH8R/DH/DO SATA AHCI Controller Intel(R) ICH8M-E/M SATA AHCI Controller Intel(R) ICH9R/DO/DH SATA AHCI Controller Intel(R) ICH9M-E/M SATA AHCI Controller Intel(R) ICH10R SATA AHCI Controller Intel(R) ESB2 SATA RAID Controller Intel(R) ICH7R/DH SATA RAID Controller Intel(R) ICH7MDH SATA RAID Controller Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller Intel(R) ICH8M-E/ICH9M-E SATA RAID Controller ENTER=Select F3=Exit Figure 3 If a message appears saying one or some file(s) cannot be found, please check the floppy disk or copy the correct SA TA RAID/AHCI driver again from the motherboard driver disk. When the screen as shown below appears, press to continue the driver installation from the floppy disk. The driver installation will be finished in about one minute. Windows Setup Setup will load support for the following mass storage device(s): Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller * To specify additional SCSI adapters, CD-ROM drives, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device ENTER=Continue F3=Exit Figure 4 Only for GA-EP45T-UD3R. GA-EP45T-UD3R/UD3 Motherboard - 98 -