Gigabyte GA-F2A75M-HD2 User Manual - Page 8

PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a, Support for RAID 0, RAID 1, and JBOD

Page 8 highlights

Storage Interface ŠŠ USB ŠŠ Internal ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Back Panel ŠŠ Connectors ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ ŠŠ Chipset: - 4 x SATA 6Gb/s connectors - Support for RAID 0, RAID 1, RAID 10, and JBOD Chipset: - 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header) - 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) 1 x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 4 x SATA 6Gb/s connectors 1 x APU fan header 1 x system fan header 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x USB 3.0/2.0 header 2 x USB 2.0/1.1 headers 1 x serial port header 1 x Clear CMOS jumper 1 x chassis intrusion header 1 x PS/2 keyboard/mouse port 1 x D-Sub port 1 x DVI-D port 1 x HDMI port 2 x USB 3.0/2.0 ports 2 x USB 2.0/1.1 ports 1 x RJ-45 port 3 x audio jacks (Line In, Line Out, Microphone) I/O Controller ŠŠ iTE® I/O Controller Chip Hardware ŠŠ Monitor ŠŠ ŠŠ ŠŠ BIOS ŠŠ ŠŠ ŠŠ ŠŠ Unique Features Š Š Š Š Š Š Bundled Software ŠŠ System voltage detection APU/System temperature detection APU/System fan speed detection APU/System fan speed control * W hether the fan speed control function is supported will depend on the cooler you install. 2 x 64 Mbit flash Use of licensed AMI EFI BIOS Support for DualBIOS™ PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Support for @BIOS Support for Q-Flash Support for Xpress Install Support for EasyTune * Available functions in EasyTune may differ by motherboard model. Support for Smart Recovery 2 Support for ON/OFF Charge Norton® Internet Security (OEM version) - 8 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

- 8 -
Storage Interface
²
Chipset:
-
4 x SATA 6Gb/s connectors
-
Support for RAID 0, RAID 1, RAID 10, and JBOD
USB
²
Chipset:
-
4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
-
6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through
the internal USB headers)
Internal
Connectors
²
1 x 24-pin ATX main power connector
²
1 x 8-pin ATX 12V power connector
²
4 x SATA 6Gb/s connectors
²
1 x APU fan header
²
1 x system fan header
²
1 x front panel header
²
1 x front panel audio header
²
1 x S/PDIF Out header
²
1 x USB 3.0/2.0 header
²
2 x USB 2.0/1.1 headers
²
1 x serial port header
²
1 x Clear CMOS jumper
²
1 x chassis intrusion header
Back Panel
Connectors
²
1 x PS/2 keyboard/mouse port
²
1 x D-Sub port
²
1 x DVI-D port
²
1 x HDMI port
²
2 x USB 3.0/2.0 ports
²
2 x USB 2.0/1.1 ports
²
1 x RJ-45 port
²
3 x audio jacks (Line In, Line Out, Microphone)
I/O Controller
²
iTE
®
I/O Controller Chip
Hardware
Monitor
²
System voltage detection
²
APU/System temperature detection
²
APU/System fan speed detection
²
APU/System fan speed control
*
Whether the fan speed control function is supported will depend on the cooler you
install.
BIOS
²
2 x 64 Mbit flash
²
Use of licensed AMI EFI BIOS
²
Support for DualBIOS
²
PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Unique Features
²
Support for @BIOS
²
Support for Q-Flash
²
Support for Xpress Install
²
Support for EasyTune
* Available functions in EasyTune may differ by motherboard model.
²
Support for Smart Recovery 2
²
Support for ON/OFF Charge
Bundled
Software
²
Norton
®
Internet Security (OEM version)