Gigabyte GA-G41MT-USB3 Manual - Page 26
Date mm:dd:yy, Time hh:mm:ss, IDE Channel 0, 1 Master/Slave, Halt On, Memory
View all Gigabyte GA-G41MT-USB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2-4 Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2011 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) Thu, Feb 17 2011 22:31:24 Item Help Menu Level } IDE Channel 0 Master } IDE Channel 0 Slave } IDE Channel 1 Master } IDE Channel 1 Slave [None] [None] [None] [None] Halt On Base Memory Extended Memory Total Memory [All, But Keyboard] 640K 988M 990M Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Date (mm:dd:yy) Sets the system date. Time (hh:mm:ss) Sets the system time. IDE Channel 0, 1 Master/Slave IDE Channel 0/1 Master/Slave, Extended IDE Drive Configure your SATA devices by using one of the three methods below: • Auto • None • Manual Access Mode Lets the BIOS automatically detect SATA devices during the POST. (Default) If no SATA devices are used, set this item to None so the system will skip the detection of the device during the POST for faster system startup. Allows you to manually enter the specifications of the hard drive when the hard drive access mode is set to CHS. (For IDE Channel 0 Master/Slave only.) Sets the hard drive access mode. (Default: Auto) The following fields display your hard drive specifications. If you wish to enter the parameters manually, refer to the information on the hard drive. Capacity Approximate capacity of the currently installed hard drive. Cylinder Number of cylinders. Head Number of heads. Precomp Write precompensation cylinder. Landing Zone Landing zone. Sector Number of sectors. Halt On Allows you to determine whether the system will stop for an error during the POST. Options are: "All Errors," "No Errors," "All, But Keyboard" (default). Memory These fields are read-only and are determined by the BIOS POST. BIOS Setup - 26 -