Gigabyte GA-H55-UD3H Manual - Page 82
B. S/PDIF Out, Connecting a S/PDIF Out Cable, Digital Output, Default Format, Digital OutputOptical
View all Gigabyte GA-H55-UD3H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
B. S/PDIF Out The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio quality. 1. Connecting a S/PDIF Out Cable: S/PDIF Optical Cable Connect a S/PDIF optical cable to an external decoder for transmitting the S/PDIF digital audio signals. 2. Configuring S/PDIF Out: On the Digital Output screen, click the Default Format tab and then select the sample rate and bit depth. Click OK to complete. (Note) If you have connected a S/PDIF digital audio cable (provided by expansion cards) to the 2-pin S/PDIF Out header (SPDIF_O) on the motherboard to output digital audio to your expansion card, you can enter the Digital Output(Optical)j screen to configure further settings, such as the sample rate and bit depth. Appendix - 82 -