Gigabyte GA-K8NSNXP User Manual - Page 26
SATA0_SB / SATA1_SB Serial ATA Connector, Controlled by nVIDIA nForce3 250 - sata driver
View all Gigabyte GA-K8NSNXP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English 9) IDE3 / IDE4 (IDE3 / IDE4 Connector, RAID/ATA133) The red stripe of the ribbon cable must be the same side with the Pin1. If you wish to use IDE3 and IDE4, please use it in unity with BIOS (either RAID or ATA133). Then, install the correct driver to have proper operation. For details, please refer to the GigaRAID manual. 39 1 IDE4 IDE3 40 2 10) SATA0_SB / SATA1_SB (Serial ATA Connector, Controlled by nVIDIA nForce3 250) 11) SATA0_SII / SATA1_SII (Serial ATA Connector, Controlled by SiI3512)) You can connect the Serial ATA device to this connector. If you wish to use RAID function, please use it in unity with BIOS and install the correct driver to have proper operation. SATA0_SB / SATA1_SB 1 7 SATA0_SII / SATA1_SII 7 1 Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND These SATA connectors support hot plug function. GA-K8NSNXP Motherboard - 26 -