Gigabyte GA-K8NXP-9 User Manual - Page 23

S_ATA0/1/2/3_SB SATA 3Gb/s Connectors, Controlled by nForce4 Ultra, SATA0/1/2/3_SII SATA Connectors - buy

Get Gigabyte GA-K8NXP-9 PDF manuals and user guides View all Gigabyte GA-K8NXP-9 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

English 9) S_ATA0/1/2/3_SB (SATA 3Gb/s Connectors, Controlled by nForce4 Ultra) 10) SATA0/1/2/3_SII (SATA Connectors, Controlled by Sil3114) SATA 3Gb/s can provide up to 300MB/s transfer rate while SATA can provide up to 150MB/s transfer rate. Please refer to the BIOS setting for the SATA and install the proper driver in order to work properly. 7 1 S_ATA_SB (Controlled by nForce4 Ultra) 7 1 SATA_SII (Controlled by Sil3114) Pin No. 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND 11) F_AUDIO (Front Audio Panel Connector) If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to utilize the front audio header, your chassis must have front audio connector. Also please make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find out if the chassis you are buying support front audio connector, please contact your dealer. Please note, you can have the alternative of using front audio connector or of using rear audio connector to play sound. 10 9 2 1 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition MIC GND MIC_BIAS Power Front Audio (R) Rear Audio (R)/ Return R NC No Pin Front Audio (L) Rear Audio (L)/ Return L - 23 - Hardware Installation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Hardware Installation
- 23 -
English
9)
S_ATA0/1/2/3_SB (SATA 3Gb/s Connectors, Controlled by nForce4 Ultra)
10)
SATA0/1/2/3_SII (SATA Connectors, Controlled by Sil3114)
SATA 3Gb/s can provide up to 300MB/s transfer rate while SATA can provide up to 150MB/s
transfer rate.
Please refer to the BIOS setting for the SATA and install the proper driver in order
to work properly.
Pin No.
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
SATA_SII
(Controlled by Sil3114)
11)
F_AUDIO (Front Audio Panel Connector)
If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper.
In order to utilize the front audio header, your chassis must have front audio connector. Also please
make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find
out if the chassis you are buying support front audio connector, please contact your dealer. Please note,
you can have the alternative of using front audio connector or of using rear audio connector to play
sound.
1
2
9
10
S_ATA_SB
(Controlled by nForce4 Ultra)
Pin No.
Definition
1
MIC
2
GND
3
MIC_BIAS
4
Power
5
Front Audio (R)
6
Rear Audio (R)/ Return R
7
NC
8
No Pin
9
Front Audio (L)
10
Rear Audio (L)/ Return L
7
1
7
1