Gigabyte GA-K8NXP-9 User Manual - Page 38

English On-Chip USB V1.1+V2.0 Enable USB 1.1 and USB 2.0 controllers. (Default Value) V1.1 Disabled Enable only USB 1.1 controller Disable onchip USB support. USB Memory Type SHADOW Set USB Memory Type to SHADOW. (Default value) Base Memory (640K) Set USB Memory Type to Base Memory (640K). USB Keyboard Support Enabled Enable USB keyboard support. Disabled Disable USB keyboard support. (Default value) USB Mouse Support Enabled Enable USB mouse support. Disabled Disable USB mouse support. (Default value) AC97 Audio Auto Disabled Enable onboard AC'97 audio function. (Default value) Disable this function. Onboard 1394 Enabled Enable onboard IEEE1394 function.(Default value) Disabled Disable onboard IEEE1394 function. Onboard LAN control (LAN1) Enabled Enable onboard LAN chip function.(Default value) Disabled Disable onboard LAN chip function. OnBoard LAN Boot ROM This function decide whether to invoke the boot ROM of the onboard LAN chip. Enabled Disabled Enable this function. Disable this function. (Default value) SATA RAID-5 Function (Controlled by Sil3114 chip) This option is to enable or disable the Serial ATA function of the Sil3114 controller. To set either RAID or non-RAID mode, you have to enter the Sil3114 RAID BIOS utility. (Upon system reboot, press or key to enter Sil3114 RAID BIOS). If you want to set up a non-RAID configuration, please select JBOD mode from the RAID BIOS. Enabled Enable onboard Serial ATA Chip.(Default value) Disabled Disable onboard Serial ATA Chip. Onboard Serial Port 1 Auto BIOS will automatically setup the port 1 address. 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value) Enable onboard Serial port 1 and address is 2F8/IRQ3. Enable onboard Serial port 1 and address is 3E8/IRQ4. 2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3. Disabled Disable onboard Serial port 1. GA-K8NXP-9 Motherboard - 38 -