Gigabyte GA-K8VNXP User Manual - Page 101
If you encounter any trouble during boot up, please follow the troubleshooting, procedures.
View all Gigabyte GA-K8VNXP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
English Troubleshooting If you encounter any trouble during boot up, please follow the troubleshooting procedures. START Turn off the power and unplug the AC power cable, then remove all of the add-on cards and cables from motherboard. Please make sure motherboard & chassis are not short ? No Please make sure all jumper settings (such as CPU system bus speed, frequency ratio, voltage and etc) are set properly. Yes Check if the CPU cooling fan attached to CPU properly. ls CPU cooling fan power connected to CPU_FAN properly? Yes Check if the memory install properly into the DIMM slot. Yes Yes Please isolate the short pin. Failure has been excluded. No Make sure the jumper setting are correct. Failure has been excluded. Plug the CPU cooling fan power No in the CPU fan connector. Plug in the AC power connector. Failure has been excluded. No Insert and push the memory module vertically into the DIMM slot. Failure has been excluded. Insert the VGA card. Then plug in ATX power cable and turn on the system. A - 101 - Appendix